iQstor report commands

March 8, 2010 at 4:22 pm (Technology, TechTips) (, )

Are you like me and need to generate system reports from your iQstor SAN units for debugging purposes?

Well then you’re in luck!  Below you will find the commands that will run the report command on both controllers.  It will also run the syslogd command on both controllers.  Simply specify the start and end dates for the syslogd command.

This will send the output to the terminal that you are on.  So, if you are going to telnet into the controllers, I suggest that you use the script tool to start your telnet session with.  Then when you are done, you just ctrl-d out of script and you’ll have the output files ready to send back into iQstor for them to look at.

And without further delay, here are the commands:

report
rrcii -C report
syslogd -q -a 3/4/10 -b 3/8/10
rrcii -C {syslogd -q -a 3/4/10 -b 3/8/10}
Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: